Win 7 Starter Iso

 

Summary :

download one of the following:. • Windows 7 Ultimate (x86)* - 32 bit. You are going to edit the contents of the .ISO file and remove the ei.cfg file. After editing burn it to a blank DVD disk or put it on a thumb drive.

Quick Navigation :

Boot from it, this will reveal all editions of Windows 7, select the Starter edition. More information in the following article about how to edit the ei.cfg file. Ei.cfg Removal Utility Lets You Use Any Product Keyhttp://lifehacker.com/5438005/eicfg-removal-utility-lets-you-use-any-product-key-with-your-windows-7-disc.

What You Should Know Before Downloading Windows 7 ISO Files

we will edit the image and remove the ei.cfg file so we can reveal all editions of Windows 7 during the installation and select Windows 7 Starter. Lets take a look at doing it step by step. After downloading the eicfg removal utility, you need to extract, since its in a .zip file.

Just right click it and click Extract All. Double click the eicfg_remover.exe file to launch it. Browse to where the Windows 7 Image (.ISO file) is stored, select it and click Open.

the ei.cfg file is now removed. The next step now is to reinstall Windows 7 Starter.

Windows 7 ISO File Download Links

Because most Netbooks do not include a DVD drive, you will have to use a tool such as the Windows 7 USB/DVD Download Tool (http://store.microsoft.com/Help/ISO-Tool) This simple tool will help you convert the same image file into to a USB thumb drive.

For installation purposes, you should get a thumb drive that’s at least 4 GBs in size to store the installation files. Browse to where the Windows 7 Image is stored, open it. Select the USB device where you want to have the backup stored to for installation.

Once the USB device has been identified, click the Begin copying button. And that’s it, the next step now is to boot your Netbook from the thumb drive, make sure the thumb drive you will be installing Windows 7 from is plugged into the USB port.

This might vary by manufacturer, but the usual one to try is F12, start your Netbook and press F12 repeatedly until a screen is displayed giving you the option to boot from a USB Memory device, select that and press Enter on your keyboard.

Windows 7 will boot as it normally does into the setup environment, the only difference this time is, you will be given a choice to select the edition of Windows 7 you want to reinstall.

Carefully click through during the setup wizard. Select Windows 7 Starter and proceed with the installation as normal. I suggest that you create a backup once the installation is complete.

Once setup is completed, you should have Windows 7 Starter installed. You can enter the product key and activate using the following method:. Click Start, type: CMD'. Right click CMD.

Click Run as adminstrator. At the command prompt, type the following commands:.

Make a Windows 7 Bootable Media and Install the System

slmgr.vbs -ipk xxxx-xxxx-xxxx-xxxx (allows you to replace the current product key with the specified).

  • xxxx-xxxx-xxxx-xxxx - represents your product key.
  • 32 or 64 bit supported processor
  • 15 Gb Hard Disk Space for 32 bit or 20GB Space for 64bit
  • DirectX 9 Graphics to use Windows Aero Feature

After finishing the Windows 7 ISO file download process, you can make a bootable media via Windows USB/DVD Download Tool or Rufus. After that, enter the BIOS and set the installation media as the boot option. Then follow the on-screen instructions to install Windows 7 on your computer. This operation helps you perform a Windows 7 clean install.